Modular Multi-Parameter Configuration
Configure the LT-NB around the parameters required by each project. Standard monitoring can include turbidity, disinfectant residuals, temperature and pH, while ORP, conductivity, TDS and dissolved oxygen are optional. This reduces unnecessary hardware and gives OEM customers more flexibility when building different monitoring packages.
Integration-Friendly Online Monitoring
The compact 370 × 470 × 140 mm structure, 5 W system power and RS-485 Modbus RTU interface make the analyzer practical for control cabinets, OEM skids, secondary water supply systems and remote stations. Standard digital communication simplifies connection to PLC, SCADA and data acquisition platforms.
Low-Turbidity Measurement for Treated Water
The turbidity module uses 90-degree laser nephelometry with a 660 nm light source. Selectable 0–1 / 20 / 100 NTU ranges, 0.005 NTU detection limit and fine resolution support continuous monitoring of drinking water and other low-turbidity samples where small changes in clarity need to be detected.
Reagentless Disinfectant Residual Monitoring
The disinfectant module uses a reagentless three-electrode amperometric principle, helping reduce routine chemical handling and consumable use. Available disinfectant configurations can include free chlorine, total chlorine, chlorine dioxide or ozone; the final sensor configuration and applicable specifications should be confirmed according to the target disinfectant and sample-water conditions.
